10	Shape Properties
11	Face Properties
12	No Bevel
13	Round
14	Inverted Round
15	Flat
16	All Intersection Edges
17	Length
18	Height
19	Width
20	Diagonal
21	Diagonal2
22	Directional Light Properties
23	Text  Properties
24	Model Properties
25	Page Properties
26	Bevel Properties
27	Imported Shape Properties
28	IntelliShape Properties
29	Cross-Section Properties
30	IntelliShape Properties
31	IntelliShape Properties
32	IntelliShape Properties
33	Facet  Model Properties
34	Spot Light Properties
35	Annotation Properties
36	Style Properties
37	Style Properties
38	Group Properties
39	Embedded Page Properties
40	2D Shape Properties
41	Embedded Object Properties
42	Surface Style Properties
43	Unable to create shape:\nCross-section for loft shape is empty, or contains outlines that overlap or are not closed..\nDefault shape will be used instead.
44	Unable to create shape:\nPath for loft shape is invalid.\nDefault shape will be used instead.
45	Unable to create shape:\nPath for loft shape is invalid.\nDefault shape will be used instead.
46	Unable to create shape:\nPath for loft shape is invalid.\nDefault shape will be used instead.
47	Unable to create shape:\nLoft path contains more than one line or curve.\nDefault shape will be used instead.
48	Unable to create shape:\nLoft shape cross-sections may not all contain the same number of  internal outlines\nor there are fewer than two active cross-sections.\nDefault shape will be used instead.
49	Unable to create shape:\nSome adjacent cross-sections in loft shape are coplanar.\nDefault shape will be used instead.
50	Unable to create shape:\nAutomatic splitting of loft shape cross-sections failed.\nDefault shape will be used instead.
51	Unable to create shape:\nLoft shape cross-sections may not all contain the same number of  internal outlines.\nDefault shape will be used instead.
52	Unable to create shape:\nOutlines matched between loft cross-sections have unequal number of curves.\nDefault shape will be used instead.
53	Unable to create shape:\nLoft cross-section contains invalid curves.\nDefault shape will be used instead.
54	Cannot open OBJ material file
55	3D Studio (*.3ds)|*.3ds|AutoCAD DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|POV-Ray 2.x (*.pov)|*.pov
56	|Raw triangles (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0  (*.wrl)|*.wrl||
57	No facet data found in file\n(often means import file filter incorrect)
58	Group code not found on line 
59	Group value not found on line 
60	Mesh resolution is greater than\nnumber of vertices available on line 
61	Incorrect polyface vertex index encountered on line 
62	Degenerate polygon(s) first detected on line 
63	Binary DXF files currently cannot be read;\nplease use text (ascii) DXF files instead.
64	Unable to satisfy all SmartDimension values at once.
65	Cannot open file
66	Embedded Scene Properties
67	All models|*.prj;*.3ds;*.dxf;*.obj;*.raw;*.stl;*.wrl|3D Studio (*.3ds)|*.prj;*.3ds|Autocad DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|Raw triangles (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0 (*.wrl)|*.wrl|All files|*.*||
68	There is no 3D surface data to export; no file created.
69	Unknown 3D file suffix; operation cancelled 
70	3D file suffix and filter type selected do not match. Continue?
71	Premature end of file - operation cancelled
72	Lookat direction cannot be all zeros
73	Up direction cannot be all zeros
74	Lookat and Up directions cannot be parallel
75	Bad magic number for 3D Studio file.\nRead cancelled
76	Mesh has multiple face arrays.\nAdditional array ignored at location 
77	No points found in mesh object.\nRead cancelled at location 
78	No faces found in mesh object at location 
79	Not enough data at line 
80	Bad number of outlines at line 
81	Bad number of indices at line 
82	Bad vertex index at line 
83	Too many vertices in face (limit of three) at line 
84	One or more input polygons have no area.\nDiscarded first at line 
85	Surface does not define a solid.\nStereolithography should not be attempted.
86	Unexpected data at line 
87	Bad coordinate index value at line 
88	Bad normal index value at line 
89	Cannot tessellate one or more polygons.\nDiscarded data!
90	Nonzero attribute found - cancelled read at location 
91	One or more input polygons have no area.\nDiscarded first at location 
92	Vertex index too high at location 
93	Color value out of bounds at location 
94	Material component found,\nbut no material created yet on line 
95	Duplicate material name found on line 
96	Material file not found on line 
97	Some of the surfaces of this model have individual surface styles.
98	Do you want the dropped style to replace the individual surface styles?
99	Imported Shape Properties
100	IGES Model Properties
101	IntelliShape Properties
2000	Start Section Edges
2001	End Section Edges
2003	Side Section Edges
2004	Shelling Edges
2005	All Edges
2006	Start Section
2007	End Section
2008	Side 
3001	3D Studio (*.3ds)|*.3ds|AutoCAD DXF (*.dxf)|*.dxf
3002	|Raw triangles (*.raw)|*.raw|VRML 1.0  (*.wrl)|*.wrl||
3003	All models|*.prj;*.3ds;*.dxf;*.raw;*.wrl|3D Studio (*.3ds)|*.prj;*.3ds|Autocad DXF (*.dxf)|*.dxf|Raw triangles (*.raw)|*.raw|VRML 1.0 (*.wrl)|*.wrl|All files|*.*||
9000	All models|*.prj;*.3ds;*.dff;*.dxf;*.obj;*.raw;*.stl;*.wrl|3D Studio (*.3ds)|*.prj;*.3ds|DFF (*.dff)|*.dff|Autocad DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|Raw  (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0 (*.wrl)|*.wrl|All files|*.*||
9001	3D Studio (*.3ds)|*.3ds|DFF (*.dff)|*.dff|AutoCAD DXF (*.dxf)|*.dxf|Wavefront OBJ (*.obj)|*.obj|POV-Ray 2.x (*.pov)|*.pov
9002	|Raw triangles (*.raw)|*.raw|Stereolithography (*.stl)|*.stl|VRML 1.0  (*.wrl)|*.wrl||
9003	Unable to create shape:\nLoft shape contains fewer than two active cross-sections.\nDefault shape will be used instead.
9004	Unable to create shape:\nLoft cross-section is empty or contains outlines that overlap or are not closed.\nDefault shape will be used instead
9005	Unable to create shape:\nLoft cross-section contains outlines that are not closed..\nDefault shape will be used instead.
9006	Unable to create shape:\nMultiple outlines in loft cross-section must be enclosed by a single outline.\nDefault shape will be used instead.
9007	Unable to create shape:\nAll loft cross-sections do not contain the same number of outlines.\nDefault shape will be used instead.
9008	Unable to create shape:\nSome outlines in loft cross-section have become invalid due to resizing.\nDefault shape will be used instead.
32772	Finish the current shape
32773	Cancel profile edit
32969	Move profile
32973	Popup properties of cross sections
32996	Bevel selected edges using blend or chamfer\nBevel Edges
33068	Edit the properties of the shape.
33069	Edit the style properties for selected object\nStyle Properties
33080	Set drawing mode for dragging endpoints by first defining angle, then distance\nAngle-Distance Drag Mode"
33089	Position lines and curves by offseting from existing geometry\nOffset 2D drawing mode
37002	Select a path
37004	Replace with an arc
37005	Replace with a bezier
37006	Replace with a line
37007	Split the curve
37009	Edit path
37014	Edit the cross section
37015	Edit text
37016	Edit handle value
37017	Toggle the light on and off.
37018	Toggle the light property for casting shadows.
37019	Apply this shape last in the sequence of shapes
37022	Show all cross sections
37025	Insert new lost section
37030	Evaluate the last model regeneration
37032	Cruise to current position.
37033	Copy to current position.
37034	Link to current position.
37036	Edit the SmartDimension value.
37037	Edit all SmartDimensions.
37038	Split the selected curve into two curves
37039	Set the distance between grid lines for this shape
37040	Select points that will connect one cross-section to the next
37041	Add a SmartDimension.
37042	Delete the SmartDmension.
37047	Compute physical body and surface properties of the shape.
37049	Select this entire outline
37050	Edits curve values\nEdit Curve
37051	Edit the numerical parameters for the selected line or curve
37052	Display the horizontal (screen-based) distance.
37053	Display the vertical (screen-based) distance.
37054	Select this entire outline
37055	Select an outline
37056	Edit embedded page in place.
37058	Open application and edit embedded object.
37059	Open application of embedded object.
37060	Check whether the underlying model data is valid
37061	Translate anchor or attachment point along axes of point.
37062	Rotate anchor or attachment point along up direction.
37065	Flip Anchor along up direction.
37066	Flip Attachment point along up direction.
37067	TriBall positions shape but not anchor
37068	TriBall positions shape and anchor
37069	Snap to 2D drawing grid
37070	Snap to 2D geometry during drawing
37071	Snap to angle increments during 2D drawing
37072	Snap to distance increments during 2D drawing
37073	Show snap and measurement feedback when using the 2D drawing tools
57632	Delete Shape.